[Elecraft] K3 - TX EQ settings not remembered.

[Don Wilhelm]

Gary,

The EQ settings are per-mode.
If you set them for SSB mode and then go to AM mode, you will find them 
set flat.

Is that possibly the problem?

73,
Don W3FPR

On 11/2/2018 1:31 PM, Gary Smith wrote:
> I seem to have an issue with the K3 memory
> settings for the microphone. I changed the
> TX EQ to match settings and now when I
> check, the TX EQ is back to flat again.
> This has been happening since I set the
> values. I've had to restore the values I
> know them by heart and can do it quickly.
> Still, I don't know when they get lost so
> I always have to keep checking to be sure
> they are still active.
>