[Elecraft] K3 - TX EQ settings not remembered.

[Gary Smith]

Hi Don,

No, I set them for SSB and at a later time 
the TX EQ is flat and I have to change it 
back to the settings to fit my mic. I 
don't use AM except to listen to broadcast 
stations & listen to the nature of RFI. 

It was when in AM I was listening to RFI 
that I thought to check the TX EQ settings 
and found them different than I had made 
them. When I thought to see if they were 
like that in SSB again, I found the values 
there all 0. I then checked different 
bands and none of them had my saved TX EQ 
on SSB.

73,

Gary
KA1J

> Gary,
> 
> The EQ settings are per-mode.
> If you set them for SSB mode and then go to AM mode, you will find
> them set flat.
> 
> Is that possibly the problem?
> 
> 73,
> Don W3FPR
> 
> On 11/2/2018 1:31 PM, Gary Smith wrote:
> > I seem to have an issue with the K3 memory
> > settings for the microphone. I changed the
> > TX EQ to match settings and now when I
> > check, the TX EQ is back to flat again.
> > This has been happening since I set the
> > values. I've had to restore the values I
> > know them by heart and can do it quickly.
> > Still, I don't know when they get lost so
> > I always have to keep checking to be sure
> > they are still active.
> > 
>