[Elecraft] K3S TX Noise Gate

[Bill Johnson]

Richard,  I thought the issue was TX Gate.  I use a Heil mic and respect the Heil reference,  personally, using the digital recorder to listen to playback, I don't find his settings good for all.  YMMV.  

Good luck.

73,
Bill
K9YEQ

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Richard
Sent: Sunday, March 18, 2018 8:07 PM
To: donwilh at embarqmail.com
Cc: Elecraft Reflector <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] K3S TX Noise Gate

May I draw your attention to the bottom of this page.

https://heilsound.com/heil-amateur-radio/support/dsp-settings/all-things-elecraft/

But then, what does Bob Heil know about audio?

Richard - W4KBX

> On Mar 18, 2018, at 1:25 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:
> 
> Richard,
> 
> Remove the boost on the high end.
> You can reduce all bands if you want to maintain the same curve.
> It is better not to boost, but cut instead.
> 
> 73,
> Don W3FPR
> 
> On 3/18/2018 1:09 PM, Richard wrote:
>> Bill,
>> Tx EQ:
>> 50  =  -16
>> 100  =  -12
>> 200  =  -6
>> 400  =  0
>> 800  =  0
>> 1200  =  +3
>> 2400  =  +9
>> 3200  =  +12
>> This works well for me.
>> Richard - W4KBX
>>> On Mar 18, 2018, at 10:53 AM, Bill Johnson <k9yeq at live.com> wrote:
>>> 
>>> Do  you have the equalizer set higher levels or lower on the upper audio range?
>>> 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to k9yeq at live.com