[Elecraft] key out port

[Joe Subich, W4TV]

The K3 schematics are on the web site:
   http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf


73,

    ... Joe, W4TV


On 3/8/2018 10:57 AM, Don Wilhelm wrote:
> Shel,
> 
> It seems the K3 schematics have disappeared from the Elecraft website, 
> but the K3S schematics are listed - and should be adequate for that 
> problem.
> 
> I do have the K3 schematics, and if that will help, send me a private 
> email (take Elecraft out of the subject line) and I can send the file to 
> you - The reflector does not allow attachments.
> 
> 73,
> Don W3FPR
> 
> On 3/8/2018 8:36 AM, Shel Sherman wrote:
>> I cannot get the key out port to pull to ground using the internal 
>> keyer  I
>> have no gate signal change when pulsing the keyer  I cannot find the
>> schematic so I can trace back to the keyer outlying order to find the 
>> break
>>   help appreciated  call 314/580/3566
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>