[Elecraft] key out port

[hawley, charles j jr]

http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf

Chuck Jack

Sent from my iPhone, cjack

On Mar 8, 2018, at 10:18 AM, Don Wilhelm <donwilh at embarqmail.com<mailto:donwilh at embarqmail.com>> wrote:

Shel,

It seems the K3 schematics have disappeared from the Elecraft website, but the K3S schematics are listed - and should be adequate for that problem.

I do have the K3 schematics, and if that will help, send me a private email (take Elecraft out of the subject line) and I can send the file to you - The reflector does not allow attachments.

73,
Don W3FPR

On 3/8/2018 8:36 AM, Shel Sherman wrote:
I cannot get the key out port to pull to ground using the internal keyer  I
have no gate signal change when pulsing the keyer  I cannot find the
schematic so I can trace back to the keyer outlying order to find the break
 help appreciated  call 314/580/3566
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to c-hawley at illinois.edu<mailto:c-hawley at illinois.edu>