[Elecraft] key out port

[GRANT YOUNGMAN]

There are K3 schematics at http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf <http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf>

Some of the modules in this package are a bit out of date (later than 2010), so the K3S docs may be needed, too, depending …

Grant NQ5T
K3 #2091, KX3 #8342



On Mar 8, 2018, at 10:57 AM, Don Wilhelm <donwilh at embarqmail.com> wrote:
> 
> Shel,
> 
> It seems the K3 schematics have disappeared from the Elecraft website, but the K3S schematics are listed - and should be adequate for that problem.
> 
> I do have the K3 schematics, and if that will help, send me a private email (take Elecraft out of the subject line) and I can send the file to you - The reflector does not allow attachments.
> 
> 73,
> Don W3FPR
> 
> On 3/8/2018 8:36 AM, Shel Sherman wrote:
>> I cannot get the key out port to pull to ground using the internal keyer  I
>> have no gate signal change when pulsing the keyer  I cannot find the
>> schematic so I can trace back to the keyer outlying order to find the break
>>  help appreciated  call 314/580/3566
> ______________________________________________________________
>