[Elecraft] FT8 using internal USB sound on the K3S

[Bob McGraw K4TAX]

Are you in DATA mode?  MIC SEL should be Line In. 
MIC (Line In ) level abt 30. 

Bob, K4TAX


Sent from my iPhone

> On Jun 25, 2018, at 9:33 AM, Jim Sheldon <w0eb at cox.net> wrote:
> 
> For some reason I can't get WSJT-X to pull the input sound or send output sound to the K3S through the USB port.  I know I have some K3S parameter(s) set wrong, but so far I haven't been able to figure out which ones or how to change them.
> 
> I had this working before so not sure what I did to change it.
> 
> Feel like a total dummy, but at 76, I do forget some things - LOL
> 
> Any help would be greatly appreciated.
> 
> Jim Sheldon, W0EB
> 
> Windows 10 PRO 64bit -I have the USB CODEC in the K3S configured as sound in and out in device manager and nothing plugged in to the rear of the K3S other than external speakers in the speaker jack - nothing to MIC or LINE In or LINE Out.
> 
> Menu Settings:
> MIC SEL is FP.L
> MIC + LIN ON
> 
> CONFIG Settings:
> KIO3B nor
> LIN OUT nor 010
> MIC BTN OFF
> L --MIX -- R  A  B
> RS232  USB
> SPKRS  2
> SPKR+PH  YES
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>