[Elecraft] FT8 using internal USB sound on the K3S

[Don Wilhelm]

Jim,

Do you have WSJT-X configured to use the USB CODEC for both input and 
output?
Do you have anything plugged into the LINE IN jack on the back of the 
K3S?  Anything plugged in there will take priority over the internal 
soundcard.

Is the MIC SEL menu set to LINE?

73,
Don W3FPR

On 6/25/2018 10:33 AM, Jim Sheldon wrote:
> For some reason I can't get WSJT-X to pull the input sound or send 
> output sound to the K3S through the USB port.  I know I have some K3S 
> parameter(s) set wrong, but so far I haven't been able to figure out 
> which ones or how to change them.
> 
> I had this working before so not sure what I did to change it.
> 
> Feel like a total dummy, but at 76, I do forget some things - LOL
> 
> Any help would be greatly appreciated.
> 
> Jim Sheldon, W0EB
> 
> Windows 10 PRO 64bit -I have the USB CODEC in the K3S configured as 
> sound in and out in device manager and nothing plugged in to the rear of 
> the K3S other than external speakers in the speaker jack - nothing to 
> MIC or LINE In or LINE Out.
> 
> Menu Settings:
> MIC SEL is FP.L
> MIC + LIN ON
> 
> CONFIG Settings:
> KIO3B nor
> LIN OUT nor 010
> MIC BTN OFF
> L --MIX -- R  A  B
> RS232  USB
> SPKRS  2
> SPKR+PH  YES
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>