[Elecraft] FT8 using internal USB sound on the K3S

[Jim Sheldon]

For some reason I can't get WSJT-X to pull the input sound or send 
output sound to the K3S through the USB port.  I know I have some K3S 
parameter(s) set wrong, but so far I haven't been able to figure out 
which ones or how to change them.

I had this working before so not sure what I did to change it.

Feel like a total dummy, but at 76, I do forget some things - LOL

Any help would be greatly appreciated.

Jim Sheldon, W0EB

Windows 10 PRO 64bit -I have the USB CODEC in the K3S configured as 
sound in and out in device manager and nothing plugged in to the rear of 
the K3S other than external speakers in the speaker jack - nothing to 
MIC or LINE In or LINE Out.

Menu Settings:
MIC SEL is FP.L
MIC + LIN ON

CONFIG Settings:
KIO3B nor
LIN OUT nor 010
MIC BTN OFF
L --MIX -- R  A  B
RS232  USB
SPKRS  2
SPKR+PH  YES