[Elecraft] KPA-1500 changes modes

[Bob Wilson, N6TV]

Are you using the PC DATA connector to have the KPA1500 automatically
follow the frequency of your transceiver?  If so, try setting MENU:RADIO
POLL OFF; commands from the amp. could be interfering with radio commands
from WSJT-X/OmniRig.  You might also try a slower or faster baud rate in
both the radio and in OmniRig.

73,
Bob, N6TV

On Thu, Aug 16, 2018 at 10:10 AM, Richard Zalewski <dick.w7zr at gmail.com>
wrote:

> I have been experiencing an intermittent problem with the KPA-1500,
> TS-990.  When running WSJT-X (USB) occasionally the 990 goes to AM-D1
> mode.  No reason I can see for it to do that.  It does this in RECEIVE.
> Just to be sure however I put lots of ferrite on all leads involved.