[Elecraft] Odd K3s Behavior for 30 meter DATA mode

[Bob]

Iain & Rich,

I have no idea how I messed that up, but you are both correct -- I was in
AFSK A submode on 30 meters.

Thanks a bunch guys!

73, bob, WB4SON

On Tue, Oct 3, 2017 at 4:07 PM, iain macdonnell - N6ML <ar at dseven.org>
wrote:

> On Tue, Oct 3, 2017 at 12:35 PM, Bob <WB4SON at gmail.com> wrote:
> > Hi,
> >
> > I have a K3s with FW 5.60.
> >
> > On all bands except 30 meters, when I place the rig into the DATA mode, I
> > see the green RX window on my P3 showing to the right of the center
> (dial)
> > frequency and matching my selected filter width.  This is what I'd expect
> > as DATA should be sending the equal of USB.  However, on the 30 meter
> band
> > only, the green RX windows is half above and half below the center (dial)
> > frequency.  It's acting like the mode is AM.  Also I can't shift the
> filter
> > below 1.1 KHz (at least for a 2.8 KHz filter).
> >
> > This must be some "Per Band" feature that I am not understanding.
>
> Are you in the right sub-mode? (hold the "DATA MD" (AFX) button, then
> make sure you're in "DATA A")
>
> 73,
>
>     ~iain / N6ML
>