[Elecraft] Odd K3s Behavior for 30 meter DATA mode

[Nr4c]

What sub-mode on 30 meters?

Sent from my iPhone
...nr4c. bill


> On Oct 3, 2017, at 3:35 PM, Bob <WB4SON at gmail.com> wrote:
> 
> Hi,
> 
> I have a K3s with FW 5.60.
> 
> On all bands except 30 meters, when I place the rig into the DATA mode, I
> see the green RX window on my P3 showing to the right of the center (dial)
> frequency and matching my selected filter width.  This is what I'd expect
> as DATA should be sending the equal of USB.  However, on the 30 meter band
> only, the green RX windows is half above and half below the center (dial)
> frequency.  It's acting like the mode is AM.  Also I can't shift the filter
> below 1.1 KHz (at least for a 2.8 KHz filter).
> 
> This must be some "Per Band" feature that I am not understanding.
> 
> Any idea as to how I can get 30 meters to work like the rest of the bands?
> 
> 73, Bob, WB4SON
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com