[Elecraft] Odd K3s Behavior for 30 meter DATA mode

[iain macdonnell - N6ML]

On Tue, Oct 3, 2017 at 12:35 PM, Bob <WB4SON at gmail.com> wrote:
> Hi,
>
> I have a K3s with FW 5.60.
>
> On all bands except 30 meters, when I place the rig into the DATA mode, I
> see the green RX window on my P3 showing to the right of the center (dial)
> frequency and matching my selected filter width.  This is what I'd expect
> as DATA should be sending the equal of USB.  However, on the 30 meter band
> only, the green RX windows is half above and half below the center (dial)
> frequency.  It's acting like the mode is AM.  Also I can't shift the filter
> below 1.1 KHz (at least for a 2.8 KHz filter).
>
> This must be some "Per Band" feature that I am not understanding.

Are you in the right sub-mode? (hold the "DATA MD" (AFX) button, then
make sure you're in "DATA A")

73,

    ~iain / N6ML