[Elecraft] K3S won't low power (5 watts) calibration error

[Don Wilhelm]

Is that "TX Test" instead of "text test"?

You should not put the K3S into TX TEST mode when doing the TX Gain 
Calibration.  TX TEST is a condition where everything in transmit works 
*except* there is no RF output.  TX TEST is set ON/OFF by holding the 
right side of the MODE button.

Use the TUNE button when doing the TX Gain Calibration manually.

73,
Don W3FPR

On 3/5/2017 11:18 PM, Wp4cw via Elecraft wrote:
> No didn't work. When I hold tune , vfo b displays text test.
>