[Elecraft] K3S won't low power (5 watts) calibration error

[Wp4cw]

No didn't work. When I hold tune , vfo b displays text test. 

Sent from my iPhone

> On Mar 5, 2017, at 8:11 PM, Don Wilhelm [via Elecraft] <ml-node+s365791n7627643h46 at n2.nabble.com> wrote:
> 
> Ted, 
> 
> A little more information please. 
> What band(s) fail? 
> Do you have a good 50 ohm dummy load attached? 
> Is the dummy load a good one for up to 54MHz? 
> 
> Often the TX Gain Calibration will fail when operated from K3Utility, 
> but will pass if done manually on each band.  See the K3S manual page 52. 
> 
> 73, 
> Don W3FPR 
> 
> On 3/5/2017 10:03 PM, Wp4cw via Elecraft wrote: 
> > TX Gain Calibration requires that your k3 be in "TX NORM" for  Calibration. 
> > 5  Watt Calibration failed. 
> > 
> ______________________________________________________________ 
> Elecraft mailing list 
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email] 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email] 
> 
> 
> If you reply to this email, your message will be added to the discussion below:
> http://elecraft.365791.n2.nabble.com/K3S-won-t-low-power-5-watts-calibration-error-tp7627641p7627643.html
> To unsubscribe from K3S won't low power (5 watts) calibration error, click here.
> NAML




--
View this message in context: http://elecraft.365791.n2.nabble.com/K3S-won-t-low-power-5-watts-calibration-error-tp7627641p7627644.html
Sent from the Elecraft mailing list archive at Nabble.com.