[Elecraft] K3S won't low power (5 watts) calibration error

[Don Wilhelm]

Ted,

A little more information please.
What band(s) fail?
Do you have a good 50 ohm dummy load attached?
Is the dummy load a good one for up to 54MHz?

Often the TX Gain Calibration will fail when operated from K3Utility, 
but will pass if done manually on each band.  See the K3S manual page 52.

73,
Don W3FPR

On 3/5/2017 10:03 PM, Wp4cw via Elecraft wrote:
> TX Gain Calibration requires that your k3 be in "TX NORM" for  Calibration.
> 5  Watt Calibration failed.
>