[Elecraft] No Output from K3S on WSJT MSK144

[Don Wilhelm]

John,

Is there any chance you plugged something into the K3S LINE IN jack? 
Doing so turns off the CODEC audio out and the audio is taken from the 
LINE IN jack only.

If nothing in the LINE IN jack, check the levels for the CODEC in your 
computer.

73,
Don W3FPR

On 2/9/2017 10:10 AM, stengrevics wrote:
> Was working fine, but today I have no output from the K3S on WSJT MSK144.  If
> I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I
> can't get any reading on the ALC meter.  Any suggestions would be
> appreciated.