[Elecraft] No Output from K3S on WSJT MSK144

[Joe Subich, W4TV]

Check the "Master" level for "Speakers (USB Audio CODEC)" in Windows'
Volume Control.  If things got changed, perhaps your Windows Sound
Settings also got changed.

73,

    ... Joe, W4TV


On 2/9/2017 10:35 AM, John Stengrevics wrote:
> Joe,
>
> Thanks.  The MIC SEL did get changed somehow.  So, I now set it to LIN IN
>
> DATA = DATA A
>
> MIC + LIN = not APPL
>
> I am connected via a USB cable from my MAC to the K3S.
>
> The Power Slider on WSJT is set mid-way.
>
> Now I do get output to drive my amp, but it’s not what it should be.  But, still no ability to adjust the ALC level if I select the “Tune” button on WSJT.
>
> John
> WA1EAZ
>
>> On Feb 9, 2017, at 10:26 AM, Joe Subich, W4TV <lists at subich.com> wrote:
>>
>>
>> Are you using DATA and data sub-mode DATA A?
>>
>> Is MENU:MIC SEL = LIN IN?
>>
>> Is MENU:MIC + LIN = OFF (or not APPL)?
>>
>> Have you connected anything to the LINE IN jack?
>>
>> Has the Soundcard Output changed in WSJT-X?
>>
>> 73,
>>
>>   ... Joe, W4TV
>>
>>
>> On 2/9/2017 10:10 AM, stengrevics wrote:
>>> Was working fine, but today I have no output from the K3S on WSJT MSK144.  If
>>> I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I
>>> can't get any reading on the ALC meter.  Any suggestions would be
>>> appreciated.
>>>
>>> John
>>> WA1EAZ
>>>
>>>
>>>
>>> --
>>> View this message in context: http://elecraft.365791.n2.nabble.com/No-Output-from-K3S-on-WSJT-MSK144-tp7626575.html
>>> Sent from the Elecraft mailing list archive at Nabble.com.
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to lists at subich.com <mailto:lists at subich.com>
>