[Elecraft] No Output from K3S on WSJT MSK144

[John Stengrevics]

Don,

No, nothing in the LINE IN jack.

The audio setting on WSJT did also get changed.  I put it back on CODEC.

It is working now.  I had to set CONFIG > MIC SEL = LINE IN, and increase the power slider on the WSJT screen.

Thanks,

John
WA1EAZ

> On Feb 9, 2017, at 12:53 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:
> 
> John,
> 
> Is there any chance you plugged something into the K3S LINE IN jack? Doing so turns off the CODEC audio out and the audio is taken from the LINE IN jack only.
> 
> If nothing in the LINE IN jack, check the levels for the CODEC in your computer.
> 
> 73,
> Don W3FPR
> 
> On 2/9/2017 10:10 AM, stengrevics wrote:
>> Was working fine, but today I have no output from the K3S on WSJT MSK144.  If
>> I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I
>> can't get any reading on the ALC meter.  Any suggestions would be
>> appreciated.