[Elecraft] KPA500 Stopped working on 40

[Jack Brindle]

Likewise make sure the K3 output power for 40 meters, for the KPA if you have the per-band power set, has not been somehow set to zero.

- Jack, W6FB

> On Sep 17, 2016, at 5:51 PM, Guy Olinger K2AV <k2av.guy at gmail.com> wrote:
> 
> If you have the KAT3 in the K3, make sure you haven't accidentally changed
> the output to the SO239 which DOESN'T have the KPA500 attached. Changed by
> tapping the ANT button. That setting is remembered by band. So if you
> accidentally tap it, it's moved to the other SO239 on the back of K3, and
> stays that way. Check anything that is remembered by band, including power
> level settings.
> 
> 73, Guy.
> 
> On Sat, Sep 17, 2016 at 8:24 PM, Robert Biamonte <steamerone at mac.com> wrote:
> 
>> Hello,
>> Yesterday all was fine, and today the KPA500 will not transmit on 40m.
>> All other bands show normal operation and output. It is connected to a K3.
>> Any thoughts before I open the covers?
>> 
>> 73,
>> Rob W3OMW
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to k2av.guy at gmail.com
>> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jackbrindle at me.com