[Elecraft] KPA500 Stopped working on 40

[Robert Biamonte]

Thanks Gary!  Ant 2 was selected for 40m. Ant 2 is my dummy load which I may have selected during the testing of the new Windom antenna.  All is well with the ether now.  *G*

very 73
Rob W3OMW


> On Sep 17, 2016, at 8:51 PM, Guy Olinger K2AV <k2av.guy at gmail.com> wrote:
> 
> If you have the KAT3 in the K3, make sure you haven't accidentally changed the output to the SO239 which DOESN'T have the KPA500 attached. Changed by tapping the ANT button. That setting is remembered by band. So if you accidentally tap it, it's moved to the other SO239 on the back of K3, and stays that way. Check anything that is remembered by band, including power level settings. 
> 
> 73, Guy. 
> 
> On Sat, Sep 17, 2016 at 8:24 PM, Robert Biamonte <steamerone at mac.com <mailto:steamerone at mac.com>> wrote:
> Hello,
> Yesterday all was fine, and today the KPA500 will not transmit on 40m.
> All other bands show normal operation and output. It is connected to a K3. Any thoughts before I open the covers?
> 
> 73,
> Rob W3OMW
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft <http://mailman.qth.net/mailman/listinfo/elecraft>
> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
> Post: mailto:Elecraft at mailman.qth.net <mailto:Elecraft at mailman.qth.net>
> 
> This list hosted by: http://www.qsl.net <http://www.qsl.net/>
> Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html>
> Message delivered to k2av.guy at gmail.com <mailto:k2av.guy at gmail.com>
>