[Elecraft] KPA500 Stopped working on 40

[Robert Biamonte]

Thank you everyone for the all the answers!!  Everything is working again.  

vy 73
Rob W3OMW


> On Sep 17, 2016, at 9:02 PM, Jack Brindle <jackbrindle at me.com> wrote:
> 
> Likewise make sure the K3 output power for 40 meters, for the KPA if you have the per-band power set, has not been somehow set to zero.
> 
> - Jack, W6FB
> 
>> On Sep 17, 2016, at 5:51 PM, Guy Olinger K2AV <k2av.guy at gmail.com> wrote:
>> 
>> If you have the KAT3 in the K3, make sure you haven't accidentally changed
>> the output to the SO239 which DOESN'T have the KPA500 attached. Changed by
>> tapping the ANT button. That setting is remembered by band. So if you
>> accidentally tap it, it's moved to the other SO239 on the back of K3, and
>> stays that way. Check anything that is remembered by band, including power
>> level settings.
>> 
>> 73, Guy.
>> 
>> On Sat, Sep 17, 2016 at 8:24 PM, Robert Biamonte <steamerone at mac.com> wrote:
>> 
>>> Hello,
>>> Yesterday all was fine, and today the KPA500 will not transmit on 40m.
>>> All other bands show normal operation and output. It is connected to a K3.
>>> Any thoughts before I open the covers?
>>> 
>>> 73,
>>> Rob W3OMW
>>> 
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to k2av.guy at gmail.com
>>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jackbrindle at me.com
>