[Elecraft] Panadapters for a MM station using 4 K3s

[John Stengrevics]

Don,

LP-PAN advertises noise reduction.  Does the P3 do similar?

John
WA1EAZ

Sent from my iPhone

> On Jul 4, 2016, at 11:27 AM, Don Wilhelm <donwilh at embarqmail.com> wrote:
> 
> Bill,
> 
> The least frustration route is to use the P3 with the SVGA option (and perhaps the TXMON option).
> 
> Certainly the LP-Pan/NaP3 or Win4K3 route will be less expensive, but requires getting the applications working right on the computer.
> 
> So the tradeoff is between using the hardware solution of the P3 vs. using LP-Pan/NaP3 which involves computer setup of the soundcard and all the attendant frustration that comes with getting everything to play together.
> 
> If I had a MM station, I would go for the P3, but if you have enough patience to work with the LP-Pan?NaP3 solution, the end result will be similar.
> 
> 73,
> Don W3FPR
> 
>> On 7/4/2016 8:25 AM, Bill OMara via Elecraft wrote:
>> I'm looking for some input on the best and most cost effective way to add
>> panadapters to my MM contest station with four K3's.
>> 
>> I currently have one of the four station outfitted with a LP PAN2 and NaP3
>> SW and it works fine with the internal sound card with 48Khz bandwidth.
>> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jstengrevics at comcast.net