[Elecraft] Panadapters for a MM station using 4 K3s
Don Wilhelm
donwilh at embarqmail.com
Mon Jul 4 11:46:51 EDT 2016
John,
NaP3 can play through the computer speakers to act as a 2nd receiver
(but there will be latency dependent on the computer). That is where the
NaP3 NB is useful.
I do not understand that a NB function would be valuable on the spectrum
display. I want to see the noise sources that may interfere with my
reception just the same as I want to see the signals on the band.
73,
Don W3FPR
On 7/4/2016 11:31 AM, John Stengrevics wrote:
> Don,
>
> LP-PAN advertises noise reduction. Does the P3 do similar?
>
> John
> WA1EAZ
>
> Sent from my iPhone
>
>> On Jul 4, 2016, at 11:27 AM, Don Wilhelm <donwilh at embarqmail.com> wrote:
>>
>> Bill,
>>
>> The least frustration route is to use the P3 with the SVGA option (and perhaps the TXMON option).
>>
>> Certainly the LP-Pan/NaP3 or Win4K3 route will be less expensive, but requires getting the applications working right on the computer.
>>
>> So the tradeoff is between using the hardware solution of the P3 vs. using LP-Pan/NaP3 which involves computer setup of the soundcard and all the attendant frustration that comes with getting everything to play together.
>>
>> If I had a MM station, I would go for the P3, but if you have enough patience to work with the LP-Pan?NaP3 solution, the end result will be similar.
>>
>> 73,
>> Don W3FPR
>>
>>> On 7/4/2016 8:25 AM, Bill OMara via Elecraft wrote:
>>> I'm looking for some input on the best and most cost effective way to add
>>> panadapters to my MM contest station with four K3's.
>>>
>>> I currently have one of the four station outfitted with a LP PAN2 and NaP3
>>> SW and it works fine with the internal sound card with 48Khz bandwidth.
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jstengrevics at comcast.net
>
More information about the Elecraft
mailing list