[Elecraft] Panadapters for a MM station using 4 K3s

[Don Wilhelm]

Bill,

The least frustration route is to use the P3 with the SVGA option (and 
perhaps the TXMON option).

Certainly the LP-Pan/NaP3 or Win4K3 route will be less expensive, but 
requires getting the applications working right on the computer.

So the tradeoff is between using the hardware solution of the P3 vs. 
using LP-Pan/NaP3 which involves computer setup of the soundcard and all 
the attendant frustration that comes with getting everything to play 
together.

If I had a MM station, I would go for the P3, but if you have enough 
patience to work with the LP-Pan?NaP3 solution, the end result will be 
similar.

73,
Don W3FPR

On 7/4/2016 8:25 AM, Bill OMara via Elecraft wrote:
> I'm looking for some input on the best and most cost effective way to add
> panadapters to my MM contest station with four K3's.
>
> I currently have one of the four station outfitted with a LP PAN2 and NaP3
> SW and it works fine with the internal sound card with 48Khz bandwidth.
>