[Elecraft] KIO3B audio into the K3?

[Hisashi T Fujinaka]

Oh, good idea. I forgot I have a Signalink somewhere.

On Mon, 4 Jan 2016, Don Wilhelm wrote:

> Hisashi,
>
> I suspect the computer or the software application.
> Do a test - connect a USB soundcard to your computer and tell WSJT-X and JT65 
> to use that soundcard.
> Connect the output of the soundcard to an amplifier or headphones and listen 
> to the audio as the application "transmits".
>
> 73,
> Don W3FPR
>
> On 1/4/2016 1:09 AM, Hisashi T Fujinaka wrote:
>> Now I think it's the WSJT-X software rather than the radio because I can
>> get JT65 to work for a while and then it stops sending audio to the K3.
>> Fortunately it hasn't stopped in the middle of a QSO, but only in
>> between.
>> 
>> It could be somehow messing with the settings, but I really don't know
>> how I'd check to see if the USB audio is making it to the radio. Power
>> cycling the radio doesn't help. I suppose I could keep rebooting the
>> laptop but that's a bit painful as well.
>> 
>> Anyone have any more hints?
>> 
>> On Sun, 3 Jan 2016, Hisashi T Fujinaka wrote:
>> 
>>> Setting up wsjt-x on the Mac is not as straightforward as the
>>> instructions say.* In any case, I think I have it decoding now but now I
>>> have to figure out how to get audio from my Mac to the K3.
>>> 
>>> Am I right in thinking that the audio TO the K3 should go through USB as
>>> well?
>>> 
>>> Any other tricks I should know about?
>>> 
>>> *The instructions say move the app ANYWHERE but the kvasd installer only
>>> works if you put the application into /Applications and not in a "Ham
>>> Radio" Folder. It's probably the space in the filename, now that I
>>> think of it.
>> 
>

-- 
Hisashi T Fujinaka - htodd at twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee