[Elecraft] KIO3B audio into the K3?

[Don Wilhelm]

Hisashi,

I suspect the computer or the software application.
Do a test - connect a USB soundcard to your computer and tell WSJT-X and 
JT65 to use that soundcard.
Connect the output of the soundcard to an amplifier or headphones and 
listen to the audio as the application "transmits".

73,
Don W3FPR

On 1/4/2016 1:09 AM, Hisashi T Fujinaka wrote:
> Now I think it's the WSJT-X software rather than the radio because I can
> get JT65 to work for a while and then it stops sending audio to the K3.
> Fortunately it hasn't stopped in the middle of a QSO, but only in
> between.
>
> It could be somehow messing with the settings, but I really don't know
> how I'd check to see if the USB audio is making it to the radio. Power
> cycling the radio doesn't help. I suppose I could keep rebooting the
> laptop but that's a bit painful as well.
>
> Anyone have any more hints?
>
> On Sun, 3 Jan 2016, Hisashi T Fujinaka wrote:
>
>> Setting up wsjt-x on the Mac is not as straightforward as the
>> instructions say.* In any case, I think I have it decoding now but now I
>> have to figure out how to get audio from my Mac to the K3.
>>
>> Am I right in thinking that the audio TO the K3 should go through USB as
>> well?
>>
>> Any other tricks I should know about?
>>
>> *The instructions say move the app ANYWHERE but the kvasd installer only
>> works if you put the application into /Applications and not in a "Ham
>> Radio" Folder. It's probably the space in the filename, now that I
>> think of it.
>