[Elecraft] KIO3B audio into the K3?

[Hisashi T Fujinaka]

Odd. I got the SignaLink to work, and then the K3S worked fine.

On Mon, 4 Jan 2016, Hisashi T Fujinaka wrote:

> Oh, good idea. I forgot I have a Signalink somewhere.
>
> On Mon, 4 Jan 2016, Don Wilhelm wrote:
>
>> Hisashi,
>> 
>> I suspect the computer or the software application.
>> Do a test - connect a USB soundcard to your computer and tell WSJT-X and 
>> JT65 to use that soundcard.
>> Connect the output of the soundcard to an amplifier or headphones and 
>> listen to the audio as the application "transmits".
>> 
>> 73,
>> Don W3FPR
>> 
>> On 1/4/2016 1:09 AM, Hisashi T Fujinaka wrote:
>>> Now I think it's the WSJT-X software rather than the radio because I can
>>> get JT65 to work for a while and then it stops sending audio to the K3.
>>> Fortunately it hasn't stopped in the middle of a QSO, but only in
>>> between.
>>> 
>>> It could be somehow messing with the settings, but I really don't know
>>> how I'd check to see if the USB audio is making it to the radio. Power
>>> cycling the radio doesn't help. I suppose I could keep rebooting the
>>> laptop but that's a bit painful as well.
>>> 
>>> Anyone have any more hints?
>>> 
>>> On Sun, 3 Jan 2016, Hisashi T Fujinaka wrote:
>>> 
>>>> Setting up wsjt-x on the Mac is not as straightforward as the
>>>> instructions say.* In any case, I think I have it decoding now but now I
>>>> have to figure out how to get audio from my Mac to the K3.
>>>> 
>>>> Am I right in thinking that the audio TO the K3 should go through USB as
>>>> well?
>>>> 
>>>> Any other tricks I should know about?
>>>> 
>>>> *The instructions say move the app ANYWHERE but the kvasd installer only
>>>> works if you put the application into /Applications and not in a "Ham
>>>> Radio" Folder. It's probably the space in the filename, now that I
>>>> think of it.
>>> 
>> 
>
>

-- 
Hisashi T Fujinaka - htodd at twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee