[Elecraft] KBPF3MDKT, KIO3B, KXV3B install order?

[Ron D'Eau Claire]

Hi: 

If you have the KRX3 sub receiver installed, start with removing it
according to the KXV3B installation instructions and wait to put it back
after you have done the others. If you don't have the KXV3 sub receiver it
won't make any difference when you do that update.  

Do the KXV3B at the same time as the KIO3B. You will have easy access to the
KXV3B with the KIO3 main board out so after removing the KIO3 board per the
instructions go ahead with replacing the KXV3B.

73, Ron AC7AC

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
Hisashi T Fujinaka
Sent: Saturday, January 2, 2016 1:47 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] KBPF3MDKT, KIO3B, KXV3B install order?

Hoping someone has done this already, but the KVIO3B is still pretty new.

I'm about to start reading the inserts, but wondering if anyone has any
suggestions as to installation order into my K3.

(Yeah, I know it was more expensive to do this way, but it's my hobby.
I'm not doing it to maximize the money I have, I'm doing it to maximize the
fun I have fiddling with my radio when the bands don't appear to be
cooperating.) :)

--
Hisashi T Fujinaka - htodd at twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ron at cobi.biz