[Elecraft] P3 Display of split

[Dave Cole]

If you don't have the latest P3 software, this may be the cause...
 There was an issue when stacking macros, whereby a macro failed in
interesting and odd ways depending-- on the previous macro command...  

They would work fine if executed in the MACRO editor Elecraft provides,
as long as you did them one at a time, but if you stacked them into a
single macro, that macro would fail.  See my previous post for a macro
I KNOW works with the new software for the P3.


-- 
73's, and thanks,
Dave (NK7Z)

For software/hardware reviews see:
http://www.nk7z.net

For MixW support see:
https://groups.yahoo.com/neo/groups/mixw/info

For SSTV help see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info


On Fri, 2016-04-22 at 23:12 +0100, Tony G6GLP wrote:
> Hi Bill and others,
> The split macro does move the B vfo up by 1khz but this is not shown
> on 
> the display (Red band) until i manually move the B vfo even just one 
> digit. The prob is not data cable cons but thanks for the thought. I
> may 
> try changing the order of some of the things in the macro or even add
> a 
> delay (;). I will keep you posted
> 
> 73 de Tony G6GLP
> 
> 
> 
> 
> On 22/04/2016 20:53, Nr4c wrote:
> > 
> > If you're saying "with both VFOs on same freq, the P3 doesn't show
> > the red band indicating that VFO B is the TX freq. " that's
> > normal.  Since both are on same freq the VFO B cursor is hidden
> > behind the green VFO A cursor.
> > But I may have misread your post.
> > 
> > Sent from my iPhone
> > ...nr4c. bill
> > 
> > 
> > > 
> > > On Apr 22, 2016, at 2:14 PM, Tony G6GLP <g6glp at strus.co.uk>
> > > wrote:
> > > 
> > > Hi All,
> > > I have noticed a little problem (not much) with the P3 display. I
> > > have  A K3 P3 and vga card set up as per the book and work fine
> > > until I go from normal to split working. I achieve this with a
> > > macro on the K3. The problem is the K3 goes into split but the
> > > display on the P3 and monitor doesnt show the split until I move
> > > the sub rx and up it pops. Its not a problem now I know about it
> > > but does anyone else see this or is there something I could
> > > change to stop it.
> > > If more details are required I can copy out the macro (Not Mine)
> > > and give a blow by low description.
> > > 
> > > 73 de Tony G6GLP
> > > ______________________________________________________________
> > > Elecraft mailing list
> > > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > > Help: http://mailman.qth.net/mmfaq.htm
> > > Post: mailto:Elecraft at mailman.qth.net
> > > 
> > > This list hosted by: http://www.qsl.net
> > > Please help support this email list: http://www.qsl.net/donate.ht
> > > ml
> > > Message delivered to nr4c at widomaker.com
> > -----
> > No virus found in this message.
> > Checked by AVG - www.avg.com
> > Version: 2016.0.7539 / Virus Database: 4556/12081 - Release Date:
> > 04/22/16
> > 
> > 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net