[Elecraft] P3 Display of split

[Tony G6GLP]

Hi Bill and others,
The split macro does move the B vfo up by 1khz but this is not shown on 
the display (Red band) until i manually move the B vfo even just one 
digit. The prob is not data cable cons but thanks for the thought. I may 
try changing the order of some of the things in the macro or even add a 
delay (;). I will keep you posted

73 de Tony G6GLP




On 22/04/2016 20:53, Nr4c wrote:
> If you're saying "with both VFOs on same freq, the P3 doesn't show the red band indicating that VFO B is the TX freq. " that's normal.  Since both are on same freq the VFO B cursor is hidden behind the green VFO A cursor.
> But I may have misread your post.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>> On Apr 22, 2016, at 2:14 PM, Tony G6GLP <g6glp at strus.co.uk> wrote:
>>
>> Hi All,
>> I have noticed a little problem (not much) with the P3 display. I have  A K3 P3 and vga card set up as per the book and work fine until I go from normal to split working. I achieve this with a macro on the K3. The problem is the K3 goes into split but the display on the P3 and monitor doesnt show the split until I move the sub rx and up it pops. Its not a problem now I know about it but does anyone else see this or is there something I could change to stop it.
>> If more details are required I can copy out the macro (Not Mine) and give a blow by low description.
>>
>> 73 de Tony G6GLP
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to nr4c at widomaker.com
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2016.0.7539 / Virus Database: 4556/12081 - Release Date: 04/22/16
>
>