[Elecraft] P3 Display of split

[Nr4c]

If you're saying "with both VFOs on same freq, the P3 doesn't show the red band indicating that VFO B is the TX freq. " that's normal.  Since both are on same freq the VFO B cursor is hidden behind the green VFO A cursor. 
But I may have misread your post. 

Sent from my iPhone
...nr4c. bill


> On Apr 22, 2016, at 2:14 PM, Tony G6GLP <g6glp at strus.co.uk> wrote:
> 
> Hi All,
> I have noticed a little problem (not much) with the P3 display. I have  A K3 P3 and vga card set up as per the book and work fine until I go from normal to split working. I achieve this with a macro on the K3. The problem is the K3 goes into split but the display on the P3 and monitor doesnt show the split until I move the sub rx and up it pops. Its not a problem now I know about it but does anyone else see this or is there something I could change to stop it.
> If more details are required I can copy out the macro (Not Mine) and give a blow by low description.
> 
> 73 de Tony G6GLP
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com