[Elecraft] KX3-PX3-KXPA100 problem

[David F. Reed]

Thanks all for the suggestions; in the end, none worked.  However, I 
then reloaded all the microcode in all 3 units, and voila, they all play 
nice together again...

73 de Dave, W5SV

On 3/12/15 4:59 PM, David F. Reed wrote:
> Folks,
>
> up til today my combination in the subject line has worked 
> flawlessly.  Today a couple of problems surfaced.
>
> (1) the power switch on the PX3 is intermittent for ON, always works 
> OFF.  In other words, it does not always power ON when asked to, but 
> always powers OFF when requested to.  Not a big deal, but would be 
> nice to fix...
>
> (2) the KXPA100 would not come on; in trying to track it down, I 
> observe that the PA mode in the KX3 was OFF; setting it to ON, the 
> KXPA100 turns on, and the Sys Fault LED flashes, then it turns off the 
> KX3 PA mode and itself OFF.  Big deal, and would love to fix it.
>
> I have rechecked all the cabling and removed and reinserted it i to no 
> avail.
>
> Thoughts or suggestions?
>
> Thanks & 73 de Dave, W5SV
>
>