[Elecraft] KX3-PX3-KXPA100 problem

[Phil Wheeler]

Good to hear you got it, Dave!

Phil W7OX

On 3/13/15 7:19 AM, David F. Reed wrote:
> Thanks all for the suggestions; in the end, none 
> worked.  However, I then reloaded all the 
> microcode in all 3 units, and voila, they all 
> play nice together again...
>
> 73 de Dave, W5SV
>
> On 3/12/15 4:59 PM, David F. Reed wrote:
>> Folks,
>>
>> up til today my combination in the subject line 
>> has worked flawlessly.  Today a couple of 
>> problems surfaced.
>>
>> (1) the power switch on the PX3 is intermittent 
>> for ON, always works OFF.  In other words, it 
>> does not always power ON when asked to, but 
>> always powers OFF when requested to.  Not a big 
>> deal, but would be nice to fix...
>>
>> (2) the KXPA100 would not come on; in trying to 
>> track it down, I observe that the PA mode in 
>> the KX3 was OFF; setting it to ON, the KXPA100 
>> turns on, and the Sys Fault LED flashes, then 
>> it turns off the KX3 PA mode and itself OFF.  
>> Big deal, and would love to fix it.
>>
>> I have rechecked all the cabling and removed 
>> and reinserted it i to no avail.
>>
>> Thoughts or suggestions?
>>
>> Thanks & 73 de Dave, W5SV