[Elecraft] KX3-PX3-KXPA100 problem

["Hjalmar Duklæt"]

Hi.
I've also had this problem a couple of times. If you have the KX3 connected to a computer - disconnect. I think that solved the problem for me. You can connect to the computer again when the KXPA100 is up and running.
73 de Haø/la4xx

On 15-03-12 22:59, "David F. Reed"  <w5sv.dave at gmail.com> wrote:
> 
> Folks,
> 
> up til today my combination in the subject line has worked flawlessly. Today a couple of problems surfaced.
> 
> (1) the power switch on the PX3 is intermittent for ON, always works OFF. In other words, it does not always power ON when asked to, but always powers OFF when requested to. Not a big deal, but would be nice to fix...
> 
> (2) the KXPA100 would not come on; in trying to track it down, I observe that the PA mode in the KX3 was OFF; setting it to ON, the KXPA100 turns on, and the Sys Fault LED flashes, then it turns off the KX3 PA mode and itself OFF. Big deal, and would love to fix it.
> 
> I have rechecked all the cabling and removed and reinserted it i to no avail.
> 
> Thoughts or suggestions?
> 
> Thanks & 73 de Dave, W5SV
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net <Elecraft at mailman.qth.net>
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to duklaet at broadpark.no
>