[Elecraft] NEED K3 HELP

[Dave Hachadorian]

What the other guys said, in different words:
Turn off the K3.
Unplug the DB-9 on the back of the K3, also unplug the key and 
paddle.
Turn on the K3, and go to config PTT - KEY.  Make sure it says 
OFF - OFF.


Dave Hachadorian, K6LL
Yuma, AZ



-----Original Message----- 
From: Jack West
Sent: Monday, June 22, 2015 1:42 PM
To: Elecraft Reflector
Subject: [Elecraft] NEED K3 HELP

First problem with my K3 in five years. I have no MENU or CONFIG 
display.
NADA...  I have an "ERR KEY" display.

I reloaded the latest Software via the K3 utility program, 
including the
DSP. I did not see anything wrong in the CONFIGURATION file.
The utiliuty program says the down load was satisfactory.

Any ideas where I look?

73 de
Jack / W7LD / "Lucky Dog"
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: 
http://www.qsl.net/donate.html
Message delivered to k6ll.dave at gmail.com