[Elecraft] NEED K3 HELP

[Joe Subich, W4TV]

ERR KEY means the key jack (or paddle?) is closed as start-up.
Note, that can also mean the DTR or RTS line on the RS-232 port
is being held high if you have CONFIG:CW-PTT set to anything
other than OFF-OFF.

73,

    ... Joe, W4TV


On 2015-06-22 4:42 PM, Jack West wrote:
> First problem with my K3 in five years. I have no MENU or CONFIG display.
> NADA...  I have an "ERR KEY" display.
>
> I reloaded the latest Software via the K3 utility program, including the
> DSP. I did not see anything wrong in the CONFIGURATION file.
> The utiliuty program says the down load was satisfactory.
>
> Any ideas where I look?
>
> 73 de
> Jack / W7LD / "Lucky Dog"
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>