[Elecraft] NEED K3 HELP

[Don Wilhelm]

Jack,

Don't overlook the microphone - PTT switch engaged will cause that same 
message.
So unplug everything except the power cord and antenna coax.   If it 
then powers on without the message, plug things in one at a time. When 
you get the error, look at the last thing plugged in.

73,
Don W3FPR

On 6/22/2015 5:07 PM, Dave Hachadorian wrote:
> What the other guys said, in different words:
> Turn off the K3.
> Unplug the DB-9 on the back of the K3, also unplug the key and paddle.
> Turn on the K3, and go to config PTT - KEY.  Make sure it says OFF - OFF.
>
>
> Dave Hachadorian, K6LL
> Yuma, AZ
>
>
>
> -----Original Message----- From: Jack West
> Sent: Monday, June 22, 2015 1:42 PM
> To: Elecraft Reflector
> Subject: [Elecraft] NEED K3 HELP
>
> First problem with my K3 in five years. I have no MENU or CONFIG display.
> NADA...  I have an "ERR KEY" display.
>
> I reloaded the latest Software via the K3 utility program, including the
> DSP. I did not see anything wrong in the CONFIGURATION file.
> The utiliuty program says the down load was satisfactory.
>
> Any ideas where I look?
>
> 73 de
> Jack / W7LD / "Lucky Dog"
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k6ll.dave at gmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3fpr at embarqmail.com
>