[Elecraft] Getting Logger+ tx audio via K3s USB audio codec

[Barry N1EU]

I've gotten many good tips but my USB audio is still dead.  So I
simplified my attempt like this:

Mic+Lin         off
Mic Sel         Line In
Line Level     60 (max)
Nothing plugged into Line In

Set up Audacity loop playing audio file with Speaker output as USB Audio Codec
I see the Windows Sound Playback level jumping up and down as expected
- audio is going to the device

Push PTT on K3s and absolutely no tx audio

Is there anything I'm possibly missing?


Thanks & 73,
Barry N1EU

On Sat, Dec 12, 2015 at 1:46 PM, Barry N1EU <n1eu.barry at gmail.com> wrote:
> Would appreciate any tips to getting the N1MM Logger+ soundcard voice
> keyer properly keying/driving my K3s via the internal USB soundcard.
> My USB-connected K3s is running fine with N1MM Logger+ and "USB Audio
> CODEC" selected as my Radio 1 output device.  I've got MIC + LIN On
> and I see the wav file properly moving the level meter in Windows
> sound and the level is set at 100, but no tx audio on the K3s.  It
> appears that everything is working as it should in Logger+.   Is there
> a separate LIN level control I need to adjust on the K3s or some other
> reason I'm not seeing tx audio being driven?
>
> Thanks & 73,
> Barry N1EU