[Elecraft] Getting Logger+ tx audio via K3s USB audio codec

[Rick WA6NHC]

Have you set the output levels on the OS driver?  In mine, that should 
be at or near max output...

Rick nhc


On 12/12/2015 8:59 AM, Barry N1EU wrote:
> I've gotten many good tips but my USB audio is still dead.  So I
> simplified my attempt like this:
>
> Mic+Lin         off
> Mic Sel         Line In
> Line Level     60 (max)
> Nothing plugged into Line In
>
> Set up Audacity loop playing audio file with Speaker output as USB Audio Codec
> I see the Windows Sound Playback level jumping up and down as expected
> - audio is going to the device
>
> Push PTT on K3s and absolutely no tx audio
>
> Is there anything I'm possibly missing?
>
>
> Thanks & 73,
> Barry N1EU
>
> On Sat, Dec 12, 2015 at 1:46 PM, Barry N1EU <n1eu.barry at gmail.com> wrote:
>> Would appreciate any tips to getting the N1MM Logger+ soundcard voice
>> keyer properly keying/driving my K3s via the internal USB soundcard.
>> My USB-connected K3s is running fine with N1MM Logger+ and "USB Audio
>> CODEC" selected as my Radio 1 output device.  I've got MIC + LIN On
>> and I see the wav file properly moving the level meter in Windows
>> sound and the level is set at 100, but no tx audio on the K3s.  It
>> appears that everything is working as it should in Logger+.   Is there
>> a separate LIN level control I need to adjust on the K3s or some other
>> reason I'm not seeing tx audio being driven?
>>
>> Thanks & 73,
>> Barry N1EU
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wa6nhc at gmail.com