[Elecraft] Getting Logger+ tx audio via K3s USB audio codec

[Barry N1EU]

Thanks Fred, I didn't.  I've got Mic+Lin working fine with another
soundcard but can't get the USB audio to play through.

73, Barry N1EU

On Sat, Dec 12, 2015 at 2:01 PM, Cady, Fred <fcady at montana.edu> wrote:
> Hi Barry,
> Make sure you don't have a cable plugged into the K3s Line In jack.
> 73,
> Fred KE7X
>
> For all KE7X Elecraft books, see www.ke7x.com
>
> ________________________________________
> From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of Barry N1EU <n1eu.barry at gmail.com>
> Sent: Saturday, December 12, 2015 6:46 AM
> To: elecraft; N1MMLoggerplus at yahoogroups.com
> Subject: [Elecraft] Getting Logger+ tx audio via K3s USB audio codec
>
> Would appreciate any tips to getting the N1MM Logger+ soundcard voice
> keyer properly keying/driving my K3s via the internal USB soundcard.
> My USB-connected K3s is running fine with N1MM Logger+ and "USB Audio
> CODEC" selected as my Radio 1 output device.  I've got MIC + LIN On
> and I see the wav file properly moving the level meter in Windows
> sound and the level is set at 100, but no tx audio on the K3s.  It
> appears that everything is working as it should in Logger+.   Is there
> a separate LIN level control I need to adjust on the K3s or some other
> reason I'm not seeing tx audio being driven?
>
> Thanks & 73,
> Barry N1EU
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to fcady at montana.edu
>