[Elecraft] Getting Logger+ tx audio via K3s USB audio codec

[Cady, Fred]

Hi Barry,
Make sure you don't have a cable plugged into the K3s Line In jack.
73,
Fred KE7X

For all KE7X Elecraft books, see www.ke7x.com

________________________________________
From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of Barry N1EU <n1eu.barry at gmail.com>
Sent: Saturday, December 12, 2015 6:46 AM
To: elecraft; N1MMLoggerplus at yahoogroups.com
Subject: [Elecraft] Getting Logger+ tx audio via K3s USB audio codec

Would appreciate any tips to getting the N1MM Logger+ soundcard voice
keyer properly keying/driving my K3s via the internal USB soundcard.
My USB-connected K3s is running fine with N1MM Logger+ and "USB Audio
CODEC" selected as my Radio 1 output device.  I've got MIC + LIN On
and I see the wav file properly moving the level meter in Windows
sound and the level is set at 100, but no tx audio on the K3s.  It
appears that everything is working as it should in Logger+.   Is there
a separate LIN level control I need to adjust on the K3s or some other
reason I'm not seeing tx audio being driven?

Thanks & 73,
Barry N1EU
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu