[Elecraft] Getting Logger+ tx audio via K3s USB audio codec

[Mike Cox]

Don't have a LINE IN plug inserted in the K3, otherwise it uses it 
instead of the internal sound card.

73,
Mike, AB9V

On 12/12/2015 8:46 AM, Barry N1EU wrote:
> Would appreciate any tips to getting the N1MM Logger+ soundcard voice
> keyer properly keying/driving my K3s via the internal USB soundcard.
> My USB-connected K3s is running fine with N1MM Logger+ and "USB Audio
> CODEC" selected as my Radio 1 output device.  I've got MIC + LIN On
> and I see the wav file properly moving the level meter in Windows
> sound and the level is set at 100, but no tx audio on the K3s.  It
> appears that everything is working as it should in Logger+.   Is there
> a separate LIN level control I need to adjust on the K3s or some other
> reason I'm not seeing tx audio being driven?
>
> Thanks & 73,
> Barry N1EU
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mike at ab9v.us