[Elecraft] HRD/DM-780, Elecraft K3 and soundcard

[Tony Lyon]

Hi Steve,
I had the slider at about 25% and I moved it all the way to the left. 
Still no change.

73,
Tony L. (KJ5XF)

> Tony…
>
> There is a SQUELCH slider near the top above the receive window (grayish horizontal bar moving). My slider was in the middle and when I moved the slider to the left all the way, I had solid copy. Where is yours set at?
>
> 73, Steve K6SAB
>
>
> On Jun 24, 2014, at 6:47 PM, Tony Lyon <tony.lyon at austin.rr.com> wrote:
>
>> Folks,
>> I decided to try HRD/DM780 for first time after using another HF digital software program for
>> probably 10 years.  I am using an Elecraft K3 and a SignaLink USB interface and both
>> MixW and MultiPSK fine with ZERO problems on either RX or TX. With HRD/DM780 (version 6.2)  the K3
>> will  TX fine (great signal reports), but on RX (with the Audio input set between 50-60%), I only get about
>> 90% copy even with a solid OLIVIA signal in the waterfall. I have tried all kinds of SYNC/TUNE Margins
>> (while using OLIVIA) to no avail. I have also tried all different levels of audio RX input to no avail.
>> If someone could share their SignaLink  and any K3 LINE-IN/LINE-OUT config values to get DM780 to work I
>> would appreciate it. I have been at this for a week (part time) and still can't get DM780 to work correctly
>> with my K3.
>>
>> There is clearly a parameter I am missing, but the documentation for setting up the soundcard for version
>> is 6.2 is a tad vague.
>>
>> 73,
>> Tony L. (KJ5XF)
>>
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to sabertsch at gmail.com
>
>