[Elecraft] PX3 question

[Howard Hoyt]

Stan,

If you position the PX3 to the left of the KX3, the two units can be 
positioned within 0.5" of each other when using all right-angle plugs, 
which makes the combined chassis width 13.5".

We make a #33-100 KX3 & PX3 DC Power Splitter which helps facilitate 
neat cable management for users of the KX3 & PX3 
(https://proaudioeng.com/accessories/). If you are using straight plugs 
for your headset, you can position them as much as 2.25" apart and still 
use the splitter.

You could also reverse the positions, in which case if you are using the 
splitter the PX3 can be positioned up to 1.25" to the right of the KX3, 
and you would have to use a right-angle BNC for the antenna connector.

An additional 1" or more of separation can be achieved by removing the 
heatshrink and tape holding the two conductors of the splitter if necessary.

Cheers & 73,

Howie - WA4PSC