[Elecraft] PX3 Question

[stan levandowski]

Thank you Bruce (and also thank you David Ahrendts, KC0XT)
This is what I needed.  Looks like everything is going to work out just 
fine!
Now  I can switch to the other window and press "enter" on the order 
page ;-)
73 and thanks again,
Stan WB2LQF


On Tue, Dec 09, 2014 at 06:32 PM, Bruce Beford wrote:

> Hi, Stan
> I'm not sure how you want this measured, so here's a couple of 
> measurements
> for you...
> Using the PX3CBL cable kit that comes with the PX3, the maximum 
> separation
> between the two units is about 8 inches.(from the right of the PX3 to 
> the
> left of the KX3)
> Measured from the outside edges (that is, with the PX3 on the left of 
> the
> KX3), the maximum distance between the left edge of the PX3 and the 
> right
> edge of the KX3 is 21".
> I hope this helps. Let me know if you would like different dimensions
> measured.
> GL es 73,
> Bruce N1RX
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to sjl219 at optonline.net
>