[Elecraft] KPA500-K3 Aux cable

[Jim Bennett]

That's true - I ordered the one noted by AD5X, part number 10H1-20206NF ($7.01 each) along with a couple "port savers" that I'll remove pins 1, 6, 7, and 8 from. This is supposed to be a straight-through cable.

Jim

On   Thursday, Oct 24, 2013, at  Thursday, 3:08 PM, Don Wilhelm wrote:

> Jim,
> 
> I shudder when you said "SVGA cables".
> You need to start with cables that connect all 15 pins straight through.  "SVGA cables" have several pins connected together and should not be used.
> 
> You have the right source, but I believe CableWholesale.com has both straight through 15 pin cables and SVGA cables.  Make certain you have the correct cables.
> 
> 73,
> Don W3FPR
> 
> On 10/23/2013 4:15 PM, Jim Bennett wrote:
>> Just want to be sure nothing has changed from what I found in the archives - I am looking at purchasing a KPA500 and KAT500 in the next few weeks and want to be sure that, if I opt to use my own SVGA cables (actually from CableWholesale.com) that I need to remove pins 1, 6, 7, and 8. Yes?
>> 
>> Jim / W6JHB
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> 
>