[Elecraft] KPA500-K3 Aux cable

[Don Wilhelm]

Jim,

I shudder when you said "SVGA cables".
You need to start with cables that connect all 15 pins straight 
through.  "SVGA cables" have several pins connected together and should 
not be used.

You have the right source, but I believe CableWholesale.com has both 
straight through 15 pin cables and SVGA cables.  Make certain you have 
the correct cables.

73,
Don W3FPR

On 10/23/2013 4:15 PM, Jim Bennett wrote:
> Just want to be sure nothing has changed from what I found in the archives - I am looking at purchasing a KPA500 and KAT500 in the next few weeks and want to be sure that, if I opt to use my own SVGA cables (actually from CableWholesale.com) that I need to remove pins 1, 6, 7, and 8. Yes?
>
> Jim / W6JHB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>