[Elecraft] KPA500-K3 Aux cable

[Ron D'Eau Claire]

OOPS I missed that. The manual clearly says DO NOT US SVGA CABLES . They are
not wired straight through. You must use straight-through cables. 

73 Ron AC7AC

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Thursday, October 24, 2013 3:09 PM
To: Jim Bennett; Elecraft Reflector Reflector
Subject: Re: [Elecraft] KPA500-K3 Aux cable

Jim,

I shudder when you said "SVGA cables".
You need to start with cables that connect all 15 pins straight through.
"SVGA cables" have several pins connected together and should not be used.

You have the right source, but I believe CableWholesale.com has both
straight through 15 pin cables and SVGA cables.  Make certain you have the
correct cables.

73,
Don W3FPR

On 10/23/2013 4:15 PM, Jim Bennett wrote:
> Just want to be sure nothing has changed from what I found in the archives
- I am looking at purchasing a KPA500 and KAT500 in the next few weeks and
want to be sure that, if I opt to use my own SVGA cables (actually from
CableWholesale.com) that I need to remove pins 1, 6, 7, and 8. Yes?
>
> Jim / W6JHB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html