[Elecraft] hi cut/low cut not work in CW?

[Brian Alsop]

Shift =.05 does do something but the result still is not as expected.us.

Here's the results with a 2.7 KHz filter
First high cut maxs out a 2.0 KHz, low cut can go to zero.

High cut      low cut	
2.0		no effect
1.8		0-0.2
1.6		0-0.4
1.4		0-0.6
1.2		0-0.8
1.1		0-0.9
1.0		0-0.9

First, why is does high cut not go to 2.7 KHz?  BW for this set of data 
is 2.7 in the BW/SHIFT mode.
Second it does not appear that the high cut and low cut controls are 
independent.

I'm curious about the reason for these observations.

73 de Brian/K3KO


On 3/20/2013 13:23, Joe Subich, W4TV wrote:
>
>  > Turn CONFIG:CW QRQ to OFF.
>
> and/or reset CONFIG:SHIFT=0.01 to SHIFT=0.05
>
> 73,
>
>     ... Joe, W4TV
>
>
> On 3/20/2013 8:46 AM, Mike K2MK wrote:
>> Hi Brian,
>>
>> Turn CONFIG:CW QRQ to OFF.
>>
>> 73,
>> Mike K2MK
>>
>>
>> alsopb wrote
>>> I was doing something odd.  Stock 2.7KHz filter, CW mode, V4.61.
>>> Removed all equalization.
>>>
>>> Wanted to adjust high cut or low cut.  Tapped shift control.  Did not
>>> revert to high cut/low cut mode.  Ditto for tapping width control.
>>>
>>> Can't simulate this with shift because of it's limited range.
>>>
>>> High cut/low cut works fine in SSB mode.
>>>
>>> 73 de Brian/K3KO
>>
>


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2240 / Virus Database: 2641/5691 - Release Date: 03/20/13